Aoc LM929 Instrukcja Użytkownika Pobierz pdf (Strona 22)

LM929

TECHNICAL SUPPORT (FAQ) (cont)

CLOCK (pixel frequency) controls the number of pixels scanned by one

horizontal sweep. If the frequency is not correct, the screen shows vertical

stripes and the picture has not correct width.

FOCUS adjusts the phase of the pixel clock signal. With a wrong phase

adjustment the picture has horizontal disturbances in light picture.

For FOCUS and CLOCK adjustment use “dot-pattern” or win 95/98 shut-down

mode pattern.

ERROR MESSAGE & POSSIBLE SOLUTION

CABLE NOT CONNECTED :

1. Check that the signal-cable is properly connected , If the connector is

loose, tighten the connector’s screws.

2. Check the signal -cable connection pins for damage.

INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode. Set the computer

to a display mode given in the Preset Display Modes table.

1 2 ... 17 18 19 20 21 22 23 24 25 26

Brak uwag

Aoc LM929 Instrukcja Użytkownika Strona 22